Servings: six to eight.
You’ll get darker ribs with this Asian-inspired rub and sauce combo, but the taste is not overpowering. If you don’t have a charcoal grill, see our gas grill version of this recipe.
Love to Cook? Sign up for eletters today and get the latest from Fine Cooking plus special offers.
Soak the wood chips in water for about 1 hour.
Slide the blade of a dinner knife under the thin, translucent silverskin that covers the bone side of each rack (note that some racks are sold with the silverskin already removed). Lift and loosen the membrane until you can grab it with a paper towel; pull it off and discard.
In a small bowl mix the spice rub ingredients. Sprinkle the rub all over the ribs, seasoning the meaty sides a little more than the bone sides and working the rub into the meat. Stand the ribs upright in a rib rack so that the meaty sides face the same direction. Leave as much room as possible between the racks; they shouldn’t touch. Let the racks sit at room temperature for 30 to 60 minutes while you prepare the grill.
Open the vents on the bottom and top of the grill. Using a chimney starter or other method, light about 50 charcoal briquettes and let them burn until they are completely ashed over. Push the briquettes to one side and then spread them evenly to cover about one-third of the charcoal grate. Carefully set a large disposable drip pan on the opposite side of the charcoal grate and fill it about three-quarters full with warm water. Put the cooking grate in place, positioning a hinged section over the coals. Leave the lid off and let the briquettes burn until they are three-quarters of their original size and then close the lid. Let the fire burn down until a thermometer in the grill’s lid registers 300° to 325°F.
Drain about half the wood chips and scatter them over the burning coals. (If your grill doesn’t have a hinged section, carefully lift the cooking grate off the grill, scatter the chips, and then replace the cooking grate.)
Remove the ribs from the grill and from the rib rack and lay them on a large rimmed baking sheet. At this point, to maintain the heat, add about 10 unlit briquettes to the bed of burning coals and leave the lid off while you mop the ribs (the added oxygen will help light the new briquettes). Lightly brush the ribs on both sides with about half of the mop. Carefully put the ribs back in the rib rack, again all facing the same direction but this time turned upside down so that the parts that haven’t browned as much will get more exposure to the heat and smoke. Return the rib rack to the grill over the drip pan, again turning the bone sides toward the coals. Close the lid.
Let the ribs cook until the meat shrinks 1/4 to 1/2 inch from the ends of at least several bones, 2 to 3 hours more, and then check them for doneness (see below). During this time, the fire should slowly lose heat, but if it falls below 250°F, add 5 to 10 unlit briquettes to maintain a temperature between 275º and 300°F. Also during this time, baste the ribs occasionally with the remaining mop (don’t bother removing them first from the rib rack). You may not use all the mop.
We haven't received any reviews yet for this recipe.
Have you made it? Tell us what you thought!
Experience the rich history of the mountainous Taos region of New Mexico as Moveable Feast with Fine Cooking gets a taste of its incredible ingredients. Host Curtis Stone meets Christopher…View all Moveable Feast recipes and video extras
© 2017 The Taunton Press, Inc. All rights reserved.
Fine Cooking may receive a percentage of sales for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.
Do you really want to delete the list, ?
This won't delete the recipes and articles you've saved, just the list.
This feature has been temporarily disabled during the beta site preview.
Add/Edit a private note for this recipeThis note is only visible to you.
Double CheckAre you sure you want to delete your notes for this recipe?